Enjoy 20% off your first order · use code Free shipping on orders $100+ · free 2-Day $175+Ships today when you order before 3 PM ET

Safety data sheet

(“S-D-S”)

The document about safe handling, not about quality, and why both matter.

The short answer

A safety data sheet is a standardized document that describes a chemical’s hazards and how to handle, store and respond to it safely, laid out in 16 fixed sections.

Under OSHA’s Hazard Communication Standard, manufacturers, importers and distributors provide a safety data sheet for each hazardous chemical, in a 16-section format aligned with the UN’s Globally Harmonized System. An SDS covers the substance in general: its hazards, handling, storage, protective measures and properties. A certificate of analysis covers one lot’s test results. They answer different questions.

Reviewed by the Codex Research quality teamUpdated Nov 8, 2026

Word study

The word itself

Say it

safe·ty da·ta sheet

(“S-D-S”)

Part of speech
Noun phrase
Syllables
5
Plural
Safety data sheets
Abbreviation
SDS; formerly MSDS, material safety data sheet

Roots and origin

RootLatin

safety
From
salvus
Means
unharmed, whole
salvuswhole+-tystate of
+

OriginLatin

data
From
data
Means
things given
dareto give+-taplural

A safety data sheet is, word for word, a sheet of facts given to keep people unharmed. The older name, material safety data sheet, was shortened when US rules adopted the internationally harmonized format.

Around the world

Tap a language to hear it spoken

Definition

What is a safety data sheet?

A safety data sheet is the standard document for communicating a chemical’s hazards. In the United States, OSHA’s Hazard Communication Standard requires chemical manufacturers, distributors and importers to provide one for each hazardous chemical they supply, and employers to keep them available to workers. Before a 2012 revision they were called material safety data sheets.

The 2012 revision aligned US rules with the UN’s Globally Harmonized System of Classification and Labelling of Chemicals, the GHS, which sets a common structure used around the world. Every SDS now follows the same 16 sections in the same order, from identification and hazards at the front to regulatory and revision information at the back. OSHA’s appendix D lists what each section must contain.

The first eight sections are the practical ones: what the substance is, its hazards, its composition, first aid, firefighting, accidental release, handling and storage, and exposure controls with protective equipment. Sections 9 to 11 cover physical and chemical properties, stability and reactivity, and toxicological information. Sections 12 to 15 cover environmental, disposal, transport and regulatory information, which OSHA does not enforce because other agencies oversee those areas.

An SDS and a certificate of analysis are often confused but do different jobs. The SDS describes the substance in general and how to handle it safely, and it changes only when the hazard information changes. The COA describes the test results for one specific lot. A careful supplier keeps both, and neither substitutes for the other.

For research materials, the SDS is the reference for handling and storage in the laboratory: what protective equipment to use, what to do after a spill, and what conditions to store the material under. Its revision date matters, because hazard classifications and formats are updated over time, most recently when OSHA aligned the standard with a newer GHS revision in 2024.

Structure

The 16 sections, in four groups

1–3
What it is

Sections 1–3: identity

Product identifier and supplier, hazard classification with pictograms and statements, and composition with CAS numbers where applicable.

4–8
What to do

Sections 4–8: response and protection

First aid, firefighting, accidental release, handling and storage, and exposure controls with personal protective equipment.

9–11
Technical data

Sections 9–11: science

Physical and chemical properties, stability and reactivity, and toxicological information.

12–15
Beyond OSHA

Sections 12–15: other agencies

Ecological information, disposal, transport and other regulations. Required in the format, but not enforced by OSHA.

16
Version control

Section 16: other information

Date of preparation or last revision, and any other useful notes.

For buyers

Why it matters

Reason 01

Handling has a reference

Storage conditions, protective equipment and spill response are written down in one standard place for the lab to follow.

Reason 02

A common format

Because every SDS uses the same 16 sections, the information you need is always in the same place.

Reason 03

It is not a quality report

An SDS says how to handle a substance safely. Only a certificate of analysis says what a specific lot contains.

At Codex Research

Codex Research products are sold for laboratory research use only, each with a lot-matched certificate of analysis on its product page. For safety and handling documentation on a specific compound, contact us and we will tell you what is available.

See it live: the certificate of analysis guide in the glossary

Ask about safety documentation

Myth vs fact

Common misconceptions

Tap a card to flip it.

Watch for

Red flags in a safety data sheet

  • Fewer than 16 sections, or sections out of the standard order
  • No date of preparation or last revision in section 16
  • An old MSDS-format document presented as current
  • Supplier details in section 1 that do not match the seller
  • An SDS offered in place of a certificate of analysis

Quick check

Checking an SDS in 30 seconds

  1. 1Count the sections

    All 16, in the standard order.

  2. 2Find the date

    A preparation or revision date in section 16.

  3. 3Match the supplier

    Section 1 should name the company you bought from.

Full walkthrough · JournalWhat research use only means

Questions

Frequently asked questions

What is a safety data sheet?

A standardized 16-section document describing a chemical’s hazards, safe handling, storage and emergency measures.

What is the difference between an SDS and an MSDS?

The SDS replaced the MSDS in the US after OSHA aligned its rules with the GHS in 2012, introducing a fixed 16-section format.

What is the difference between an SDS and a COA?

An SDS covers the substance’s hazards and handling in general. A COA reports the test results for one specific lot.

How many sections does an SDS have?

Sixteen, always in the same order.

Who has to provide an SDS?

Under OSHA’s Hazard Communication Standard, manufacturers, importers and distributors of hazardous chemicals.

Which SDS sections does OSHA not enforce?

Sections 12 to 15, on ecology, disposal, transport and other regulations, which fall under other agencies.

Where is the revision date on an SDS?

In section 16, other information.

Sources and standards

  1. 29 CFR 1910.1200: Hazard communicationU.S. Electronic Code of Federal Regulations
  2. Hazard Communication Standard: Safety Data Sheets (OSHA Brief 3514)Occupational Safety and Health Administration
  3. Appendix D to 1910.1200: Safety Data Sheets (Mandatory)Occupational Safety and Health Administration
  4. Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Rev. 10 (2023)United Nations

Written and reviewed by the Codex Research quality team · Last reviewed November 8, 2026 · For laboratory research use only.

On real products

Where this shows up

Every Codex product page publishes the certificate for the lot in stock. See safety data sheet on a real product, then read the full guide.

ARA-290Repair

Research peptide

ARA-290

Tissue-Repair Research

ARA-290 is an 11-residue peptide engineered from the helix-B face of erythropoietin that binds the EPOR/CD131 heteromer without erythropoietic activity.

99%+Purity+162Reward pts
$64.99
View product
CJC-1295 DACGH axis

Research peptide

CJC-1295 DAC

GH-Axis Research

CJC-1295 with DAC is tetrasubstituted GRF(1-29) carrying a maleimidopropionyl group at Lys30 that binds albumin covalently, extending its action.

99%+Purity+199Reward pts
$79.99
View product
Tesamorelin / IpamorelinBlends

Research peptide

Tesamorelin / Ipamorelin

GH-Axis Research

A blend of tesamorelin, a GHRH(1-44) analog, with ipamorelin, a selective ghrelin-receptor pentapeptide, studied as two separate receptor pathways.

99%+Purity+212Reward pts
$84.99
View product
Journal guideWhat research use only meansRead the guide

From lab to your door

Every compound.Every lot, proven.

U.S.-made research vials, shipped with lot-matched, lab-tested COAs you can scan straight off the label.