Isocratic elution
The eluent composition stays the same for the whole run. Simple and stable, but slow for mixtures with a wide range of retention.
(“ee-LOO-shun”)
The order things leave the column is the whole separation.
The short answer
Elution is the washing of compounds out of a chromatography column by a flowing solvent, each leaving at its own time.
In chromatography a sample is held on a stationary phase and a flowing mobile phase, the eluent, carries it through. Each compound is held back by a different amount, so they leave the column, or elute, at different times. In peptide HPLC the eluent usually gets steadily stronger in organic solvent, a gradient, so more strongly held compounds come off later.
Reviewed by the Codex Research quality teamUpdated Nov 8, 2026
Word study
Say it
e·lu·tion
(“ee-LOO-shun”)
Roots and origin
RootLatin
The Latin image is literal: washing something out. In a column, the eluent washes each compound out in turn, and the separation lives in the timing.
Around the world
Tap a language to hear it spokenDefinition
Elution is the step in chromatography where compounds are washed out of the column. IUPAC defines elution chromatography as a procedure in which the mobile phase is continuously passed through or along the stationary bed, carrying the sample components with it. The liquid or gas that does the carrying is the eluent; what flows out the end is the eluate.
Separation comes from different degrees of holding back. Every compound spends part of its time stuck to the stationary phase and part moving with the eluent. One that sticks more moves more slowly and leaves later. The time from injection to the top of a compound’s peak is its retention time, and in a given method it is reproducible enough to help identify a peak.
Peptide HPLC almost always uses reversed-phase columns and gradient elution. The stationary phase is water-repelling, so peptides are held in a mostly water eluent. As the run proceeds, the share of organic solvent, typically acetonitrile with a little acid, is raised steadily. Each peptide lets go when the eluent becomes strong enough for it, which turns small differences in structure into separate peaks.
Peptides are unusually sensitive to eluent strength. Reviews of peptide reversed-phase HPLC describe how a small change in organic content shifts their retention a lot, because of how many contact points a peptide has with the stationary phase. That sensitivity is what makes gradients effective, and it is also why a shallow gradient separates close impurities better than a steep one.
Elution conditions shape the purity number. A gradient that is too steep or too short can push an impurity out under the main peak, where it is counted as product. Two labs can report different purities for the same material simply because they eluted it differently. That is why a credible purity result names its column, eluent, gradient and detection wavelength.
Interactive
Change the percentage of organic solvent in the eluent. Stronger eluent pushes everything off sooner, but the peaks crowd together.
An illustrative model of reversed-phase retention, in which the log of each peptide’s retention factor falls in a straight line as the organic fraction rises. Peptides respond steeply to solvent strength: a few percent too little and they stay on the column; a few percent too much and they rush out together. That is why peptide methods usually use a gradient instead of a fixed composition.
Modes
The eluent composition stays the same for the whole run. Simple and stable, but slow for mixtures with a wide range of retention.
The eluent gets steadily stronger during the run. The standard for peptides, because it sharpens late peaks and spreads the separation.
The eluent changes in a few abrupt steps rather than smoothly. Common in purification and sample clean-up.
Compounds held by charge are released by raising salt concentration or changing pH.
For buyers
Impurities are only counted if they elute at a different time from the main peak.
Gradient, column and eluent choices can move purity numbers, so they belong on the report.
Retention time helps match a peak, but identity needs mass spectrometry.
At Codex Research
Each Codex Research product page carries a lot-matched certificate of analysis that reports HPLC purity and mass spectrometry identity for the lot in stock.
See it live: the HPLC guide in the glossary
Myth vs fact
Tap a card to flip it.
Watch for
Quick check
Column type, eluent and gradient named on the report.
A clean main peak without unexplained shoulders.
Identity confirmed by mass, not by retention time alone.
Full walkthrough · JournalHPLC vs mass spec: how purity is testedQuestions
The washing of compounds out of a chromatography column by a flowing mobile phase, called the eluent.
The eluent goes into the column and carries the sample. The eluate is what comes out.
The time from injection to the top of a compound’s peak. It reflects how strongly the compound is held.
A run in which the eluent becomes steadily stronger, so strongly held compounds are released in turn.
Their retention changes sharply with eluent strength, so a gradient separates them far better than a constant eluent.
Yes. A steep or short gradient can hide impurities under the main peak.
Usually water and acetonitrile, each with a small amount of acid.
Sources and standards
Written and reviewed by the Codex Research quality team · Last reviewed November 8, 2026 · For laboratory research use only.
On real products
These products’ current certificates report purity by RP-HPLC, the method behind elution. See the result on each product page, then read the full guide.
GH axisResearch peptide
GH-Axis Research
CJC-1295 without DAC is modified GRF(1-29) carrying four substitutions at positions 2, 8, 15 and 27 that resist the plasma enzyme cutting native GHRH.
CellularResearch peptide
Cellular Research
SS-31 (elamipretide) is a synthetic tetrapeptide that binds cardiolipin at the inner mitochondrial membrane, studied in bioenergetics and oxidative-stress research.
BlendsResearch peptide
Neuropeptide Research
A blend of Semax, an ACTH(4-7) analog, with Selank, a tuftsin analog. Both are seven-residue peptides from the same Russian design programme.
Journal guideHPLC vs mass spec: how purity is testedRead the guide
From lab to your door
U.S.-made research vials, shipped with lot-matched, lab-tested COAs you can scan straight off the label.
21+ Only
Codex Research provides research-grade compounds for laboratory and research use only. By entering, you confirm you are at least 21 and agree to our Terms & Conditions.
By proceeding you affirm the statements above are true. Products are supplied for laboratory research use only — not for human or veterinary use, not for use in diagnostic procedures, and not evaluated by the U.S. Food and Drug Administration. Full disclaimer.