Fmoc/tBu SPPS
The modern standard. Employs base-labile Fmoc for alpha-amino deprotection and acid-labile side-chain protections. Uses mild cleavage conditions (90–95% TFA).
(“SOL-id fayz PEP-tyde SIN-thuh-sis”)
The foundational chemical process behind modern synthetic research peptides.
The short answer
Solid-phase peptide synthesis is a laboratory process that builds a peptide chain one amino acid at a time while anchored to an insoluble resin support.
Invented by Bruce Merrifield, SPPS anchors the starting amino acid by its carboxyl end to an insoluble polymer bead. Sequential cycles of deprotection, activation and coupling assemble the sequence toward the N-terminus. Once assembly finishes, an acid cleavage cocktail detaches the peptide from the resin and strips side-chain protecting groups, releasing crude peptide for HPLC purification.
Reviewed by the Codex Research quality teamUpdated Nov 16, 2026
Word study
Say it
sol·id-phase pep·tide syn·the·sis
(“SOL-id fayz PEP-tyde SIN-thuh-sis”)
Roots and origin
RootLatin
OriginGerman
OriginGreek
The name describes the physical setup: instead of reacting free molecules in an open solution, the growing peptide is held fast on a solid bead while excess reagents and solvents are rinsed away after each coupling step.
Around the world
Tap a language to hear it spokenDefinition
Solid-phase peptide synthesis (SPPS) revolutionized biological chemistry when Robert Bruce Merrifield introduced it in 1963, earning the 1984 Nobel Prize in Chemistry. Prior to SPPS, assembling peptides in liquid solution required exhausting purification and isolation after every single amino acid addition. Merrifield’s insight was to anchor the first amino acid covalently to an insoluble polymer bead, turning purification into a rapid, repeatable process of washing and filtering.
Synthesis proceeds in the opposite direction of ribosomal translation in living cells: from the C-terminus to the N-terminus. The carboxyl group of the C-terminal amino acid is covalently attached to a functionalized resin bead (such as Wang resin or 2-chlorotrityl chloride resin). The amino acid’s alpha-amino group is protected by a temporary chemical cap, preventing uncontrolled polymerization.
Each synthesis cycle follows three core steps: deprotection, activation and coupling. First, a mild reagent (typically piperidine in dimethylformamide) removes the N-terminal protecting group. Next, the incoming amino acid is activated using coupling reagents (such as HBTU, HATU or DIC with Oxyma) to make its carboxyl group electrophilic. Finally, the activated amino acid couples to the free amino group on the resin-bound peptide. Unreacted reagents are thoroughly washed away through a glass frit without losing the resin-bound product.
Modern SPPS predominantly relies on the Fmoc/tBu orthogonal protection strategy. The temporary Fmoc group guarding the alpha-amino backbone is base-labile (cleaved by piperidine), while permanent protecting groups shielding reactive amino acid side chains (such as tert-butyl ethers or trityl groups) are acid-labile. This orthogonality ensures side chains remain protected during hundreds of deprotection and coupling cycles, preventing branched or modified artifacts.
When the full-length chain is complete, a final deprotection exposes the N-terminus (or an acetyl cap is added). The peptide is then detached from the solid support and stripped of its side-chain protecting groups in a single cleavage step using a high concentration of trifluoroacetic acid (TFA) supplemented with nucleophilic scavengers (such as triisopropylsilane, water and ethanedithiol) to quench reactive carbocations. The resulting precipitate is crude peptide, ready for preparative HPLC purification.
Strategies
The modern standard. Employs base-labile Fmoc for alpha-amino deprotection and acid-labile side-chain protections. Uses mild cleavage conditions (90–95% TFA).
The classical Merrifield approach. Uses acid-labile Boc for alpha-amino deprotection (TFA) and strong acid (liquid hydrogen fluoride, HF) for final resin cleavage.
Applies focused microwave energy during coupling and deprotection steps. Drastically accelerates reaction rates and helps overcome peptide aggregation in difficult sequences.
Pumps heated reagents continuously through a packed resin bed rather than incubating in batch vessels. Enables sub-minute cycle times and precise real-time monitoring.
Checkpoints
SPPS consists of repeated coupling cycles followed by cleavage. These checkpoints ensure complete reaction at each step and identify synthesis side-products before purification.
For buyers
In peptide research, missing even a single amino acid residue can alter secondary folding, receptor binding kinetics or solubility. SPPS discipline prevents deletion artifacts.
High coupling efficiency (>99.5% per cycle) directly dictates crude purity. A clean crude synthesis makes preparative HPLC separation straightforward and yields higher final purity.
Understanding SPPS chemistry explains why peptide certificates report specific impurities—such as truncated sequences, oxidized residues or TFA counter-ions.
At Codex Research
Every Codex Research peptide is assembled via precision automated solid-phase peptide synthesis using certified Fmoc-protected amino acids, followed by preparative HPLC purification and mass spectrometry identity verification.
See it live: the lot-matched certificate on the BPC-157 product page
Myth vs fact
Tap a card to flip it.
Watch for
Quick check
Confirm whether the sequence was assembled using standard Fmoc/tBu chemistry with documented coupling agents.
Ensure the peptide underwent post-synthesis preparative HPLC fractionation rather than being packaged in crude form.
Check the COA mass spec trace to confirm the observed molecular weight matches the exact theoretical sequence mass.
Full walkthrough · JournalUS-made vs imported research peptidesQuestions
SPPS stands for solid-phase peptide synthesis: the laboratory method of assembling peptide chains sequentially on insoluble polymer beads.
In liquid-phase synthesis, reactions occur in solution and products must be laboriously precipitated and purified after each amino acid. In SPPS, the peptide remains anchored to insoluble beads, allowing unreacted reagents and side products to be washed away in seconds.
Anchoring the C-terminal carboxylate to the solid support prevents C-terminal oxazolone formation, which is the primary chemical pathway that causes amino acid racemization during coupling.
Protecting groups temporarily block reactive amine, carboxyl and side-chain functional groups to prevent unwanted side-reactions, ensuring that peptide bond formation occurs exclusively between the intended positions.
Cleavage is the treatment of the resin-bound peptide with a strong acid (usually trifluoroacetic acid) to sever the linker bond to the bead and remove all side-chain protecting groups simultaneously.
Deletion peptides are synthesis impurities where one amino acid failed to couple during a cycle, resulting in an n-1 or n-2 sequence missing that residue. Efficient capping and preparative HPLC eliminate these impurities.
No. The insoluble polymer resin beads are completely filtered out during cleavage. The dissolved peptide passes through the filter while the beads remain behind.
Sources and standards
Written and reviewed by the Codex Research quality team · Last reviewed November 16, 2026 · For laboratory research use only.
On real products
Every Codex peptide is synthesized, purified and freeze-dried before it is tested. See solid-phase peptide synthesis on a real product, then read the full guide.
BlendsResearch peptide
GH-Axis Research
A blend of tesamorelin, a GHRH(1-44) analog, with ipamorelin, a selective ghrelin-receptor pentapeptide, studied as two separate receptor pathways.
CellularResearch peptide
Cellular Research
SS-31 (elamipretide) is a synthetic tetrapeptide that binds cardiolipin at the inner mitochondrial membrane, studied in bioenergetics and oxidative-stress research.
BlendsResearch peptide
Neuropeptide Research
A blend of Semax, an ACTH(4-7) analog, with Selank, a tuftsin analog. Both are seven-residue peptides from the same Russian design programme.
Journal guideUS-made vs imported research peptidesRead the guide
From lab to your door
U.S.-made research vials, shipped with lot-matched, lab-tested COAs you can scan straight off the label.
21+ Only
Codex Research provides research-grade compounds for laboratory and research use only. By entering, you confirm you are at least 21 and agree to our Terms & Conditions.
By proceeding you affirm the statements above are true. Products are supplied for laboratory research use only — not for human or veterinary use, not for use in diagnostic procedures, and not evaluated by the U.S. Food and Drug Administration. Full disclaimer.