For research use only.This product is not FDA approved and is strictly for laboratory, academic, or institutional research — not for human or animal consumption or for any clinical or medical use.Not FDA approved · Not for human useLearn more about research use only
BAC Water

Laboratory Supply

BAC Water (Bacteriostatic Water, 0.9% Benzyl Alcohol)

Research use only
$9.99In stock

Bacteriostatic water is sterile water carrying 0.9% benzyl alcohol as a preservative, supplied in sealed 3 mL and 10 mL vials for laboratory work.

Bundle & saveHigher quantities. Lower cost per vial.
Expected arrival2–5 business days
Sterile solution0.9% benzyl alcohol
Multiple-entry vialStopper & crimp seal
Codex Research
Lab testedPending
Batch verifiedMeets research standards
Full reportPDF download below
Batch COAPublished for each batch

Certificate of Analysis

BAC Water 3 mL · certificate pending

COA PENDINGLOT Pending
PendingHPLC purityPendingCurrent lot in testing

Lot Pending · Tested Pending

BAC Water
TestSpecificationMethodResultStatus
Benzyl alcohol0.9% (9 mg/mL)HPLCPendingReported
SterilitySterileUSP <71>PendingReported
pH4.5 – 7.0USP <791>PendingReported
PENDINGLAB TESTED

Analysis performed in accordance with internal SOPs.
For laboratory research use only, not for human consumption.

Research insights

Research Overview

Bacteriostatic water, shortened to BAC water, is sterile water with 0.9% benzyl alcohol added as a preservative. The benzyl alcohol holds back bacterial growth, which is what allows a sealed vial to be entered more than once during laboratory work.

CompositionSterile water, 0.9% benzyl alcohol
Product ClassLaboratory diluent
Research AreaLab Supplies
01

What is BAC Water?

BAC water is short for bacteriostatic water: sterile water that carries 0.9% benzyl alcohol, which works out to 9 mg in every millilitre.

The benzyl alcohol is the working part. It is a small aromatic alcohol that loosens bacterial membranes and holds back growth without killing every cell outright, and that holding-back is what the word bacteriostatic describes.

Plain sterile water carries no preservative, so once its seal is broken it is meant to be used in a single sitting. The benzyl alcohol is what lets you enter a bacteriostatic vial several times over a limited working window.

Compound classLaboratory diluent
02

Mechanism of Action

Benzyl alcohol is studied as an antimicrobial preservative that raises bacterial membrane fluidity and inactivates membrane proteins at concentrations below those that kill cells. Typical laboratory work includes preservative-effectiveness challenge testing, membrane-fluidity assays and side-by-side comparison with other preservatives used in multiple-entry vials.
03

Key Research Areas

BAC Water is studied across these areas of laboratory research:

General laboratory diluent
Preservative-effectiveness testing
Bacterial membrane-fluidity studies
Multiple-entry vial handling
04

Research Context

Storage20–25 °C, sealed
PresentationSealed multiple-entry vial
HandlingTrained personnel, standard laboratory PPE
Important

BAC Water is supplied strictly as a laboratory research material. This product is not FDA approved and is not for human or animal use.

Product data

BAC Water specifications

Product
Bacteriostatic water: sterile water with benzyl alcohol added as a preservative
Preservative
Benzyl alcohol, 0.9% (9 mg per mL)
Preservative identity
Benzyl alcohol · CAS 100-51-6 · PubChem CID 244 · C7H8O, 108.14 g/mol
Form
Clear aqueous solution, sealed glass vial
Vial format
Multiple-entry vial with rubber stopper and crimp seal
Vial sizes
3 mL, 10 mL
Lot certificate
Pending for the current lot
Storage
20 to 25 °C, sealed
Availability
BAC Water for sale online in 3 mL and 10 mL vials. Ships within the United States.
Intended use
Laboratory research only. Not for human or veterinary use.

Lot values come from the batch certificate of analysis. Identifiers come from PubChem and UniProt.

Published research

What does research show about BAC Water?

5 cited sources · laboratory and in-vitro research only

01

What is bacteriostatic water made of?

Sterile water with 0.9% benzyl alcohol, or 9 mg per millilitre, added as a bacteriostatic preservative. That is the composition in the FDA-submitted labeling for USP-grade bacteriostatic water, which also gives its pH as 5.7 within a 4.5 to 7.0 range.

02

What is benzyl alcohol?

A small aromatic alcohol: a benzene ring carrying one hydroxymethyl group. PubChem catalogues it as CID 244 with the formula C7H8O. It is one of the antimicrobial preservatives covered in a 2023 review of preservatives for protein and peptide formulations.

03

What does research show about benzyl alcohol and bacterial membranes?

It loosens them. In work on Methylobacterium, benzyl alcohol raised membrane fluidity, changed the size and shape of giant lipid vesicles and inactivated membrane proteins, including an efflux pump, at concentrations that did not kill the cells.

04

What does benzyl alcohol do to E. coli in laboratory studies?

At non-lethal levels it caused short-lived membrane fluidization and permeabilization in Escherichia coli and switched on heat-shock gene transcription. The authors traced the cells' later heat tolerance to the rapid remodelling of membrane composition that followed.

05

Why do vials that are opened more than once need a preservative?

Because every entry is a chance to bring in microbes. The 2023 Pharmaceutics review states that biological formulations meant for repeated withdrawal require an antimicrobial preservative, and that the preservative has to be chosen to suit whatever else is in the vial.

06

What is the difference between bacteriostatic water and sterile water?

The preservative. Both are sterile water, but only the bacteriostatic version carries 0.9% benzyl alcohol, which its labeling describes as a bacteriostatic preservative for a multiple-entry vial. Plain sterile water has none.

References

  1. 1Hospira, Inc. Bacteriostatic Water, USP: FDA-submitted product labeling, Pfizer Labeling.Study ↗
  2. 2PubChem. CID 244 · Benzyl alcohol.PubChem ↗
  3. 3Yano T, Miyahara Y, Morii N, Okano T, Kubota H. Pentanol and benzyl alcohol attack bacterial surface structures differently. Appl Environ Microbiol. 2015;82(1):402-408.NIH ↗
  4. 4Shigapova N, et al. Membrane fluidization triggers membrane remodeling which affects the thermotolerance in Escherichia coli. Biochem Biophys Res Commun. 2005;328(4):1216-1223.PubMed ↗
  5. 5Stroppel L, et al. Antimicrobial preservatives for protein and peptide formulations: an overview. Pharmaceutics. 2023;15(2):563.Study ↗

Research use only. Studies listed describe laboratory and in-vitro research. They are not claims about any use of this product.

Advancing knowledge. Enabling discovery. Supporting rigorous laboratory research.Research with confidence →

Handling guidelines

Storage & Handling

Proper storage and handling help maintain the integrity and quality of this compound for accurate research results.

UnopenedStore sealed at a controlled room temperature of 20–25 °C.
After First EntryKeep the stopper covered between entries and record the date it was first entered.
Before HandlingInspect the vial and discard if cloudiness, particulates, or a damaged seal are present.
1Storage Protocol
Room Temperature

Store sealed at a controlled room temperature of 20–25 °C.

20–25 °CCONTROLLED
Avoid Temperature Extremes

Keep the vial away from freezing conditions and direct heat.

SteadyTEMPERATURE
Protect from Light

Keep in original packaging and away from direct light.

DarkSTORAGE
2Handling WorkflowA simple workflow for best practices.
Remove from storageFrom its room-temperature shelf.
Check the sealStopper and crimp intact.
Inspect vialClear, colourless, no particulates.
Prepare for researchClean, controlled lab setting.
3What to Look ForInspect before handling.
Clear, colourless solution
No visible particulates or cloudiness
Intact stopper, seal and cap
Label legible and in date
If any abnormalities are present, discard the vial.
4Researcher ChecklistUse this quick checklist before beginning.
Storage temperature confirmed
Vial condition checked
Seal intact before first entry
Appropriate laboratory PPE available
First-entry date recorded
5Additional NotesTechnical information for optimal handling.
First EntryWrite the date the stopper is first entered on the vial label.
Laboratory EnvironmentHandle in a clean, controlled setting using standard PPE (gloves, lab coat, eye protection), by trained personnel only.
Aseptic TechniqueSwab the stopper before each entry and work aseptically to keep the solution sterile.
For Research Use OnlyNot for human or animal use. Follow all applicable laboratory safety protocols.
Proper storage and handling support the highest level of quality for your research.Research with confidence →

Important information

Intended Use & Legal Disclaimer

This compound is sold solely for in vitro laboratory research. It is not a drug, food, cosmetic or medical device, and it must not be used in humans or animals. It must not be administered to any living subject or used in any diagnostic application.

Not FDA ApprovedFor research use only
Not for Human or Animal UseDo not ingest or administer
Research ResponsibilityBuyer confirms compliant handling and disposal
For research use only

Supplied strictly for in vitro laboratory research by qualified professionals.

  • Not for human use
  • Not for veterinary use
  • Not for diagnostic use
Regulatory Status

This product is not approved by the FDA or any other regulatory authority for human or veterinary use.

Not FDA ApprovedFor research use only
Use Restrictions

This compound must not be used in humans or animals under any circumstances.

Not for Human or Animal UseDo not ingest or administer.
Researcher Responsibility

By purchasing, the buyer confirms they are acting in a research capacity and accepts full responsibility for compliant handling, storage, and disposal.

For Qualified ResearchersFollow proper handling and disposal procedures.
BAC Water research vialBAC Water
Additional information

Not evaluated by the FDA and not intended to diagnose, treat, cure, or prevent any disease. Sale is restricted to qualified research professionals and certified laboratories.

Codex Research accepts no liability for use outside controlled laboratory research.

In vitro research onlyPurchase of this product is subject to the Codex Research Terms of Sale and the research-use attestation made at checkout.View full terms of sale →

Purchase terms

Terms of Sale

All sales by Codex Research are final. Damaged, incorrect or undelivered orders reported within 48 hours of delivery are resolved under our Return & Refund Policy. Buyers must be qualified professionals and assume full responsibility for safe handling and regulatory compliance. Every batch is lab tested. Batch-specific Certificates of Analysis are available on our COAs page.

All sales finalTemperature-sensitive materials
Buyer responsibilityQualified professionals only
Lab testedEvery batch tested
Research use onlyNot for human or animal use
01
Orders & Payment
  • All sales are final once an order ships.
  • Orders can be cancelled before they are dispatched.
  • Checkout requires the research-use attestation and the 21+ confirmation.
  • Card payments are refunded to the original card. Bitcoin payments are refunded in Bitcoin at the order’s USD value.
02
Shipping
  • Orders placed by 3 PM ET ship the same business day.
  • Free standard shipping on orders over $100, and free 2-Day on orders over $175.
  • We ship within the United States only. No freight forwarders.
  • Parcels are packed discreetly. Accurate delivery details are the buyer’s responsibility.
03
Claims & Refunds
  • Report damaged, incorrect or undelivered orders within 48 hours of delivery.
  • Verified claims are resolved under our Return & Refund Policy.
  • Bundles are refunded as a whole, not item by item.
  • Memberships are non-refundable.
04
Buyer Responsibility
  • Purchases are limited to qualified research professionals and institutions.
  • The buyer accepts responsibility for compliant handling, storage and disposal.
  • Products are for laboratory research only, not for human or animal use.
  • Codex Research accepts no liability for use outside controlled laboratory research.
Full terms, shipping and refund policies apply to every order.View full terms of sale →

For research use only · Not for human consumption

Content last reviewed November 2026 · Reviewed by the Codex Research quality team

Learn more: How to read a COA · Purity grades explained · Third-party testing explained · How vials handle shipping

Glossary

Key terms on this page

Plain-English definitions from the Codex glossary.

FAQ

Questions about BAC Water

What is BAC Water?

BAC water is short for bacteriostatic water: sterile water that carries 0.9% benzyl alcohol, which works out to 9 mg in every millilitre. The benzyl alcohol is the working part. It is a small aromatic alcohol that loosens bacterial membranes and holds back growth without killing every cell outright, and that holding-back is what the word bacteriostatic describes.

How is BAC Water studied in the laboratory?

Benzyl alcohol is studied as an antimicrobial preservative that raises bacterial membrane fluidity and inactivates membrane proteins at concentrations below those that kill cells. Typical laboratory work includes preservative-effectiveness challenge testing, membrane-fluidity assays and side-by-side comparison with other preservatives used in multiple-entry vials. BAC Water is studied across these areas of laboratory research: General laboratory diluent; Preservative-effectiveness testing; Bacterial membrane-fluidity studies; Multiple-entry vial handling.

Is BAC Water for sale online, and how much does it cost?

Yes. BAC Water is for sale online at Codex Research from $9.99 for the 3 mL vial, for laboratory research only. Orders placed before 3 PM ET on a weekday ship the same day. Standard shipping is $9.99 and is free on orders over $100.

Where can I buy bacteriostatic water?

Codex Research sells bacteriostatic water online in sealed 3 mL and 10 mL vials, so it can go in the same order as your research peptides. Each vial holds sterile water with 0.9% benzyl alcohol. Weekday orders placed before 3 PM ET ship the same day, and the lot certificate will be posted here once it is issued.

Is BAC water the same as sterile water?

No. Both start as sterile water, but BAC water also contains 0.9% benzyl alcohol, a preservative that holds back bacterial growth after the seal is first broken. Plain sterile water has no preservative and is meant for single use, while a bacteriostatic vial can be entered more than once during laboratory work.

What is in bacteriostatic water?

Sterile water and benzyl alcohol at 0.9%, which works out to 9 mg per millilitre. Benzyl alcohol, PubChem CID 244, is a small aromatic alcohol that disorders bacterial membranes. The labeling for USP-grade bacteriostatic water gives the finished solution a pH of 5.7, inside a 4.5 to 7.0 range.

Is bacteriostatic water FDA approved?

Not as sold here. Bacteriostatic water made for clinical use is a prescription-only product in the United States. The vials Codex Research sells are supplied strictly as laboratory research material for in-vitro work, are not labeled or sold as a drug, and are not for human or animal use.

How should bacteriostatic water be stored?

Sealed, at a controlled room temperature of 20 to 25 °C, which is the range given in the labeling for USP-grade bacteriostatic water. Before a vial is opened, check that the solution is clear and the seal intact, and note the date the stopper is first entered.

Is BAC Water for human use?

No. BAC Water is sold strictly for in-vitro laboratory research. This product is not FDA approved, is strictly for laboratory, academic or institutional research, and is not for human or animal consumption. Buyers must confirm they are 21 or older and purchasing for research.

More answers in the full FAQ
Shipping guides

Shipping BAC Water to your state

Same-day dispatch before 3 PM ET, insulated packaging and lot-matched certificates to all 50 states.

Related products

BestsellerGLP-3 (RT)Metabolic

Research peptide

GLP-3 (RT)

Metabolic Research

A triple agonist at the GIP, GLP-1 and glucagon receptors, three members of the class B1 glucagon subfamily, supplied for receptor-pharmacology research.

99%+Purity+199Reward pts
$79.99
View product
BPC-157Repair

Research peptide

BPC-157

Tissue-Repair Research

BPC-157 is a 15-amino-acid synthetic peptide taken from a gastric-juice protein, studied in endothelial, fibroblast and growth-factor research. Lot-tested by HPLC and LC-MS.

99%+Purity+149Reward pts
$59.99
View product
GHK-CuDermal

Research peptide

GHK-Cu

Dermal Matrix Research

GHK-Cu is the copper(II) complex of the tripeptide Gly-His-Lys, a constituent of human plasma, studied in fibroblast matrix and copper-transport research. Lot-tested by HPLC.

99%+Purity+99Reward pts
$39.99
View product
TesamorelinGH axis

Research peptide

Tesamorelin

GH-Axis Research

Tesamorelin is a 44-residue GHRH analog carrying a trans-3-hexenoyl group on Tyr1, studied in GHRH-receptor and peptide-stability research. Lot-tested by HPLC.

99%+Purity+162Reward pts
$64.99
View product
TrendingNAD+Cellular

Research peptide

NAD+

Cellular Research

NAD+ is nicotinamide adenine dinucleotide, the oxidized redox coenzyme and sirtuin substrate, supplied as lyophilized powder in 500 mg and 1000 mg vials. Lot-tested by LC-MS.

99%+Purity+224Reward pts
$89.99
View product
TB-500Repair

Research peptide

TB-500

Tissue-Repair Research

TB-500 is Ac-LKKTETQ, the acetylated actin-binding fragment of Thymosin Beta-4 (residues 17–23), supplied as a lyophilized peptide for actin-regulation and cell-migration research.

99%+Purity+187Reward pts
$74.99
View product
MOTS-cCellular

Research peptide

MOTS-c

Cellular Research

MOTS-c is a 16-residue peptide encoded inside the mitochondrial 12S rRNA gene, studied in AMPK, folate-cycle and mitonuclear signaling research. Lot-tested by LC-MS.

99%+Purity+124Reward pts
$49.99
View product
GLP-2 (TZ)Metabolic

Research peptide

GLP-2 (TZ)

Metabolic Research

A dual agonist at the GIP and GLP-1 receptors, two class B1 GPCRs whose natural ligands share close sequence homology, for receptor-pharmacology research.

99%+Purity+149Reward pts
$59.99
View product
GLP-1 (SM)Metabolic

Research peptide

GLP-1 (SM)

Metabolic Research

A long-acting agonist at the GLP-1 receptor, a class B1 GPCR of the secretin family, supplied for receptor-pharmacology research in 10, 20 and 30 mg vials.

99%+Purity+174Reward pts
$69.99
View product
KlowBlends

Research peptide

Klow

Repair Blend

Klow is a four-peptide research blend: 51.33 mg GHK-Cu, 11.55 mg KPV, 9.32 mg TB-500 and 8.00 mg BPC-157 per vial on the current lot, for multi-pathway laboratory research.

99%+Purity+249Reward pts
$99.99
View product

From lab to your door

Every compound.Every lot, proven.

U.S.-made research vials, shipped with lot-matched, lab-tested COAs you can scan straight off the label.